SpeedFactory Racing Aluminum Tucked Radiator

The SpeedFactory Racing Aluminum Tucked Radiator is a must have when trying to utilize precious engine bay space in your Honda/Acura vehicle. These radiators are substantially more efficient than your OEM radiator even under average daily driving conditions, and also provide lower coolant temperatures in very extreme environments and conditions- resulting in the increased performance you need all around for your vehicle.

B/D/H/F - Outlets will be on the back right side of the radiator.

K/J - Outlets will be on the back left side of the radiator.

- The radiator core is USA made, 100% aluminum and the radiator is a dual pass, dual core cross flow design that is proven to reduce coolant temperatures by up to 20-30 degrees.

- The Speedfactory logo is CNC engraved into the top of the shroud, and these radiators are available in standard hose end (32mm) or -16AN configurations for the ultimate clean look.

- This radiator is designed for street, track, and show applications.

- Dual SPAL High Performance cooling fans and 1-piece aluminum fan shroud is attached for maximum cooling efficiency.

- SPAL 30100358 Fan Specifications: 7.5" Straight Blade Puller Fan, 366CFM 15AMP Fuse

- Overall dimensions: 24" wide x 9 1/2" tall x 5 1/2" thick (Thickness includes fan shroud and fans).

- Welded inlet / outlet fittings are either -16AN male -OR- 32mm billet hose ends

- Radiator drain fitting is -6AN ORB (O-Ring Boss)

- All SpeedFactory Racing radiators are proudly manufactured and pressure tested in-house

- Hundreds of road racers, drag racers, show car owners, and daily drivers all around the world are staying cool with a SpeedFactory Racing Aluminum Tucked Radiator. Order yours today!

INSTALLATION

Minor drilling for the mounting holes (and in some applications minor cutting of the radiator support) is necessary for installation.

**NOTE** The mounting tabs do not come with holes drilled in them because many applications will need to have the holes drilled in slightly different locations.

Our fitting configuration recommendations are as follows:

B Series Cylinder Head:

Thermostat Housing - 45 Degree Fitting 

Bottom of Radiator - 45 Degree Fitting

Filler Neck - 45 Degree Fitting

Top of Radiator - 45 Degree Fitting 

K-Series Engines

Thermostat Housing - 45 Degree Fitting

Bottom of Radiator - 90 Degree Fitting

Filler Neck - 45 Degree Fitting

Top of Radiator - 45 Degree Fitting

Please Allow 5 - 7 Days For Fabrication.